PROJECT

Nigerian copper mine flotation

Project Introduction

Capacity: 10t/h 
 
Processed material: slag
 
Daily operation:8 hours

 

Equipment Configuration

The process of copper flotation preferential flotation process is: crushing and screening→grinding and grading→priority flotation copper concentrate→activated flotation other concentrate→concentrated dehydration. The preferential flotation process is divided according to the floatability of the ore. First, a single copper concentrate is floated and the remaining concentrates are suppressed. After the flotation of the copper concentrate is completed, the remaining concentrates are separately activated and floated.

Project Introduction

By analyzing the mineral characteristics and the content of different minerals, the beneficiation scheme was finally determined. The copper mine preferential flotation method, that is, the three-stage open-circuit crushing and one-stage grinding process, preferentially float copper to obtain copper concentrate and sulfur concentrate, and then Magnetic separation gives iron concentrates, and finally two stages of dehydration are carried out from copper and sulfur concentrates.

Nigerian copper mine flotation

Henan Afuruika Machinery Equipment Co. , Ltd

Technological Process

According to the natural condition, terrain and features of copper-molybdenum ore in Mongolia, our Fote specialists design the plant with machines like PE jaw crusher, PEX impact crusher, ball mill, spiral classifier, flotation machine and dryer. Four processes are included in for processing copper-molybdenum ore like crushing, grinding, flotation dressing and drying, etc. 

Henan Afuruika Machinery Equipment Co. , Ltd

Crushing stage

crushing by jaw crusher, the crushed product is transported to the cone crusher by belt conveyor for two or three stages of crushing;

Grinding and classifying stage

Grinding classification: the broken minerals enter the lattice ball mill for grinding and grading;

Flotation separation stage

After stirring by the agitation tank, the slurry enters the JJF type mechanical agitation flotation machine for flotation, and at the same time, the selective collector is added to preferentially float copper to obtain qualified copper concentrate, and then the flotation is obtained. Concentrate.

Drying stage

Copper-molybdenum ore concentrates produced after the flotation stage are relatively wet. So, they need to subside in thickener and are dried in dryer. Finally, dried finished concentrates will be produced. 

Please write what you need,we will contact you asap!

Please leave a message
and we'll get back to you.

x
Home Whatsapp Inquiry