Mineral Metallurgy Test Work
Mineral processing test is the main basis of mineral processing design.The results not only have a direct impact on the rational determination of the technological process, equipment selection, product scheme and technical and economic indexes, but also serve as the basis for the successful realization of the design indexes and economic benefits after the concentrator is put into operation.Therefore, for the design of the basis of the mineral processing test, must be undertaken by a special experimental research unit
Samples: the mineral processing experiment requires the customer to provide 50KG samples, and the special mineral needs about 100 kg~500kg.
Time: the general experiment takes 30 working days, and the detailed experiment takes 60 working days.
Adopt and prepare the ore samples used in the dressing test
Determination of Chemical Properties of Raw Ore
Determination of raw ore properties, including: determination of raw ore material composition and determination of raw ore chemical properties (multielement analysis, particle size analysis, density determination, relative grindability determination)
After the determination of ore properties is completed, the experimenters will carry out experiments on the grindability, chemical reaction, and mineral processing methods of the ore.
After obtaining the finished ore, chemical analysis, particle size analysis, grade analysis and physical property determination should be carried out for the concentrate, medium ore and tailing products
After completing all the mineral processing experiments, summarize the experimental process and data, write a detailed mineral processing experiment report, and determine the best mineral processing method and technological process