PROJECT

Ukrainian kaolin mine

Project Introduction

Capacity: 10t/h 
 
Processed material: slag
 
Daily operation:8 hours
 

Equipment Configuration

This customer comes from Mongolia. Due to the limits in geolocation and policies, this customer needs to depend on import for acquiring excellent copper-molybdenum ore processing machines. So, this customer builds a long-term cooperation with our company. He bought machines like SP flotation machine, Ф2700×4500 ball mill, etc. In order to expand the production, he decides to purchase a whole production plant at this time. Through a series of careful investigation, our specialists and engineers design a 300t/h copper-molybdenum ore beneficiation plant and now it has been working for a long time. And our customer’s benefit increases a lot.

Project Introduction

For chrome ore beneficiation, there are various methods such as re-election, flotation, magnetic separation, etc. hanfa will give the final beneficiation method according to the ore analysis report and the ore dressing test report. Among them, the main refining main beneficiation process is: chrome ore fine material which is ground to reasonable fineness, and the ore mixture is cleaned and classified by the difference of the specific gravity of the solid particles in the liquid by the spiral classifier. . The material is then washed by a jig and a shaker, and transported to a spiral chute to sort the fine-grained ore powder. After being sieved, it is sent to a flotation machine or a magnetic separator to enter the flotation concentrate and dehydrated by a thickener. Continue to feed the dryer to dry to obtain a dry concentrate that can be used or secondary grinding to continue extracting minerals.

Ukrainian kaolin mine

Technological Process

According to the natural condition, terrain and features of copper-molybdenum ore in Mongolia, our Fote specialists design the plant with machines like PE jaw crusher, PEX impact crusher, ball mill, spiral classifier, flotation machine and dryer. Four processes are included in for processing copper-molybdenum ore like crushing, grinding, flotation dressing and drying, etc. 

Henan Afuruika Machinery Equipment Co. , Ltd

Crushing stage

Through vibrating feeder, large raw ores are continuously fed into PE jaw crusher for primary crushing, then into PEX jaw crusher for secondary crushing, after into circular vibrating screen for screening work. For those larger crushed ores, they would be delivered back to PEX jaw crusher again for continuous crushing. While, for those qualified ones, they will enter into storage bin through conveyors. 

Grinding and classifying stage

Crushed copper-molybdenum ores in storage bin are conveyed into ball mill for being ground. The ground powders will enter into spiral classifier for being classified and washed. 

Flotation separation stage

For those qualified copper-molybdenum ore powders, they are conveyed into mixer barrel and added with certain amount of drugs. After the complete mixing and agitation, these powders will enter into flotation machine for dressing work. 

Drying stage

Copper-molybdenum ore concentrates produced after the flotation stage are relatively wet. So, they need to subside in thickener and are dried in dryer. Finally, dried finished concentrates will be produced. 

Please write what you need,we will contact you asap!

Please leave a message
and we'll get back to you.

x
Home Whatsapp Inquiry